home *** CD-ROM | disk | FTP | other *** search
- Path: ns.hookon.be!usenet
- From: Patrick.DeLaere@hookon.be (Patrick Delaere)
- Newsgroups: comp.sys.amiga.introduction
- Subject: Re: Q: Using two monitors
- Date: 23 Jan 1996 18:54:18 GMT
- Organization: Hookon vzw
- Message-ID: <1156.6595T1245T4@hookon.be>
- References: <Pine.ULT.3.91.960121181449.8537A-100000@krypton.mankato.msus.edu>
- NNTP-Posting-Host: gent13.hookon.be
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP)
-
-
- >Hi all. I have an A2000 with a 1084S monitor. If I had a Picasso II and
- >a standard multisync monitor that didn't sync down to 15.75 Mhz, how could I
- >use two monitors with the system, to still be able to use the old software
- >that uses the 15.75 Mhz mode? Does anyone know how to make it work? Thanks
- >in advance ...
-
- >Please send me e-mail rather than reposting,
-
- >:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
- >Patrick Sullivan ITNERNET: bob@krypton.mankato.msus.edu
- >Departmint ov Speleng & Hanwriteng CNSMgr@ms1.mankato.msus.edu
- >Mantado Stayt Uvnersty NBCS: B3 f w c++d g+ s k?? rv p++!
-
- > "Good heavens, Miss Sakamoto -- you're beautiful!!" - Dr. M. Pyke
- >:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
-
- I'm using that setup :
- connect the Multisync to the picasso and the 1084 to the 23pin amigavideo
- and disable or remove the Autoswitch option in Picasso monitor.
-
- Oh, by the way, you will be much better off with CyberGraphx drivers as
- they are more than 3 times faster.
-
-
- <sb>Patrick Delaere - Patrick.DeLaere@hookon.be
-
-